Product Catalog
For heating roofs and gutters (anti-icing)

Single core heating cable 23 W/m with copper braid shield

Выпускается в виде готовых к применению изделий (секций)длиной от 15 до 194 метров, мощностью от 0,32 до 4,455 кВт (220 В)

Application

For outdoor surfaces heating (roofs, gutters, open areas, roads, sidewalks) in conditions of low mechanical stress (class M1). Operating temperature is no more than 90° С. Specific power, max. 23 W/m.
Supplied in the form of ready-to-use sections from 15 to 194 meters long, with a power from 0.32 to 4.45 kW (230 V). Sections have two attached power cables of different cross-section size (acc. to length/loads) with hermetic connection class IPX7.

Cable design

1) Conductor: copper core
2) Inner insulation: elastomer
3) Outer insulation: PVC compound
4) Shield material: copper braid
5) Sheath: PVC compound

Standards

IEC 800

Marking

HEATING CABLE WOKS 23 ODESKABEL MAX 90 °C

Main technical and mechanical characteristics

Conductor diameter, mm: 5,6
Estimated cable weight, kg/km: 61.2
Operating temperature range: from -40° С to +50° С
Installation temperature range: not lower than -5° С
Bending radius: of at least 6 cable diameters
Tension resistance: no more than 120 N
Deformation resistance, for cables of M1 class: no more than 600 N
Shield electrical resistance: no more than 34,5 Ohm
Insulation electrical resistance (60s/1000V): not less than 1 MOhm
No records found.

MOD_BARCODE_MOD_TITLE

MOD_BARCODE_BUHTA

MOD_BARCODE_BARABAN